AED 181-080

AED 181-080 is a batch mixing system with a working volume of 80 litres. The system is reliably mixing water and lubricant concentrate. By default the dosing of the lubricant is done manually. An electrical pump supplies the lubricant to the connected spraying device(s).



  • Tank made of plastics, resistant against all commonly used release agents
  • All other components in contact with lubricant made in stainless steel
  • Tank system pressure less
  • Volume 80 litre
  • Contactless level control
  • Diaphragm pump with pulsation damper
  • Agitation of lubricant via bypass
  • Water connection for rinsing of the system
  • Easy accessibility to all components
  • Connection for supply and return line permits a ring line from and to the spraying device. Suitable for media which sediments quickly



  • Connection for hand spray gun DAG087/DAG090, with start/stop function
  • KDP mixing pump - Piston dosing pump with end position monitoring
  • Compressed air service unit, incl. filter and oil separator
  • Supply pumps with higher supply rate


Industry 4.0 compatibility

  • Control Siemens S7-1200 with Proface HMI
  • IO Link Master Profinet, IO-Link connection to sensors and actuators
  • Plug & play for sensors and actuators
  • Status indications / information:Setting of dilution ratio (Mixing pump KDP)
    - Setting of output pressure for lubricant
    - Input pressure of water
    - System status
    - Status of sensors and actuators


AED 181-80

Intuitive and simple programming

Customer benefits

  • Adaptable for all press sizes
  • Easy maintenance
  • No heating of the lubricant
  • Small tank volume to avoid bacterial contamination
  • Compact design

Technical Data

Feature Data
Control S7-1200 with  Proface HMI Integrated in AED spray units
Interface Potential-free interface to master control (spraying system) Profinet connection to spray system


Feature Data
Input water 1 x DIN 2553 G ¾‘‘ D22 NW20, 3 bar
Input air 1 x DIN 2553 G ½’’ D15 NW 13, 6 bar, acc. to ISO 8573-1, dry & filtered 10 µm
Outlet lubricant 1 x DIN 2553 G 1’’ D28 NW25
Dilution ratio KDP 1:5 - 1:20
Supply pumps Type S Type L
Delivery rate (max.) 900 l/h at 5 bar 3.400 l/h at 5 bar
Connected load ca. 0,5 kVA
Mains voltage 3 x 380 – 480 V PE +/- 10 %
Mains frequency 50-60 Hz
Ambient temperature +5°C to 40°C